|
| Posted on 3/5/08 at 10:09 PM | |
|
|
Temp gun is probably not reading the platen accurately due to reflections off of the teflon coating or something. I assume that you are using a paper meant for this purpose. As for 400 degrees at fifteen seconds, well the Ultra Soft instructions say five seconds at that heat; TRANSFER TIME AND TEMPERATURE: REGULAR TRANSFERS: Transfer at 350°F (177°C) for 20 seconds or 400 F (204 C) for 5 seconds at 40-50 p.s.i. Allow transfer to cool completely (10-30 seconds) before stripping off the paper. ____________________ The Board Best Helps Those Who Help Themselves. In the beginning...read some old posts, do a search for a specific topic that interests you. See what's been said in the past. Also, be sure to check out the articles here as well. Remember the center crease is merely a suggestion. | |
  
|