|
| Posted on 12/17/06 at 03:14 PM | |
|
|
Ok so this may not get answered for at least 3 months but its worth a shot: I bougth some lb premium white and the consistency is nice, very easy to print- but im not completely sold as to why its so much better? The prints are coming out somewhat lumpy. This might be a curing issue, but I've found that it takes a lot longer to cure this ink than my IC inks. The temp when coming out of the dryer is around 350-360 and my IC inks cure well. The one stroke, same temp is not passing the stretch test, and cracks. I slow down the belt and my output temp is around 380. the one stroke passes the stretch test BUT it gets a bit bumpy. Any input on this? Suggestions? I'd like to use this ink cuz its easy to print. but as of now its sitting on the shelf, taking a back seat to my hard to print, but good finished product - IC LB ____________________ Failure is Great | |
 
|
