Subject: Re: Re: I've done the same exact thing...

Remote IP:69.42.16.75
Remote Host:
ScreenPrinters.Net > Boards > General >Re: Re: I've done the same exact thing...


Posts like crazy
Status: Offline

Posted on 5/16/08 at 10:26 AM  


Andy Manes
Owner
Frog Prints

I do pressure wash but not with a "pressure washer", instead I purchased a garden sprayer attachment with the different settings and I use "JET" to do my reclaim and "SHOWER" for washing out. It was cheaper and did just the same as a pressure washer.

Take it from someone who has cleaned and reclaimed screens as a full time job; a hose and a nozzle (or sprayer) is not ...just the same as a pressure washer.

I, like you, can reclaim most of my screens with a special nozzle that I have installed in my "wet room", but it doesn't match the results I get from my pressure washer in my outdoor spraying station. Some stubborn spots especially like being blasted from the inside.

One thing I'll concede is that the lower pressure from a nozzle or hand sprayer and garden hose, will tend to stretch or tear mesh less when emulsion is not softened.

 

____________________
The Board Best Helps Those Who Help Themselves.
In the beginning...read some old posts, do a search for a specific topic that interests you. See what's been said in the past. Also, be sure to check out the articles here as well.


Remember the center crease is merely a suggestion.

 
View Member's Profile Visit User's Homepage View All Posts By This Member     
 
This thread:
[ Home | ScreenPrinters.net | Feedback | Register | Profile | FAQ | Help ] [ Login | Lost Password ]

Only registered members may post to the Boards.

Need to register? It's free!

Having trouble posting after logging in? Click Here