Subject: Re: How do you fix this or can you?

Remote IP:75.24.28.225
Remote Host:

ScreenPrinters.Net > Boards > General >Re: How do you fix this or can you?

Action1992 Over 100 posts Status: Offline	Posted on 5/15/08 at 08:34 PM
Roger Smith Owner Ink'n Thread Works	Applying emulsion remover and letting it dry pretty much makes it permenent. This is a trick used for years on automatic presses for long runs 5-10,000 and so on. After exposing we would wash out the screen and while still wet spray stencil remover on both sides of the screen lightly. lay flat and let dry. Cheaper than buying the stencil hardner that was sold.
Roger Smith Owner Ink'n Thread Works

This thread:

How do you fix this or can you? by tinahov28 - on 5/15/08 at 02:05 PM

Re: How do you fix this or can you? by raygreenwood - on 5/15/08 at 02:26 PM

Try a little bleach. Nothing to lose!!...np by yaleteamsandtees - on 5/15/08 at 03:27 PM
I've done the same exact thing... by imagep - on 5/15/08 at 03:54 PM

Re: I've done the same exact thing... by tinahov28 - on 5/16/08 at 10:07 AM

Re: Re: I've done the same exact thing... by frog - on 5/16/08 at 10:26 AM
Re: Re: I've done the same exact thing... by raygreenwood - on 5/17/08 at 08:53 AM

That's a nice answer Ray . . . . . . . by wise-acre - on 5/15/08 at 04:16 PM

Re: How do you fix this or can you? by frog - on 5/15/08 at 03:56 PM
Do you use a pressure washer? (NP) by erickster - on 5/15/08 at 04:00 PM
Re: How do you fix this or can you? by Action1992 - on 5/15/08 at 08:34 PM

[ Home | ScreenPrinters.net | Feedback | Register | Profile | FAQ | Help ] [ Login | Lost Password ]

Only registered members may post to the Boards.

Need to register? It's free!

Having trouble posting after logging in? Click Here