|
| Posted on 5/13/08 at 05:39 PM | |
|
|
No experience with that machine, but, assuming that your press is level and was assembled correctly, I would strongly suggest that you speak with Mark Vasilantone or someone else at Vastex, as they specifically state that; 5.2 Printers are partially assembled, inspected, and adjusted for all heads down prior to partial disassembly and packing. It sounds like something got knocked out of whack big time. I see that even their entry level V1000 is capable of "multiple heads down", since only two of six will line up with four stations. The 6/6 V2000 is billed as "all heads down" Mark always welcomes your direct input. 1-800-4VASTEX ____________________ The Board Best Helps Those Who Help Themselves. In the beginning...read some old posts, do a search for a specific topic that interests you. See what's been said in the past. Also, be sure to check out the articles here as well. Remember the center crease is merely a suggestion. | |
  
|
