|
| Posted on 12/20/07 at 08:04 PM | |
|
|
Make sure the amperage rating for the cord is correct for the load rating of the flash. Also remember if the extension cord is really long you may get a voltage drop to the flash. You will know this if the flash does not go up to the temperature it used to. If this is the case bigger wire gage will help. ____________________ Rich Hoffman CEO The M&R Companies 1N372 Main St. Glen Ellyn, Illinois USA 60137 800-736-6431 +1-630-858-6101 rich.hoffman@mrprint.com mrprint.com 
| |
  
|