|
| Posted on 2/6/07 at 07:22 PM | |
|
| Hello Josh, your press would use almost any type of grease, but white lithium is most common. Use it on all moving threads, micro control knobs, micro clamp levers, pallet arm knobs, screen clamp knobs, again any adjustment threads that you move on a daily or weekly basis. Also a small amount of light oil on top of the machine near the center bolt will drip onto the roller bearings. Not much to maintain on the dryer or exposure unit but clean lint and dust, and of course keep the spray tack off everything but your pallet tops. If you need manuals there is a download for most of them. Call or e-mail the office for the info. Hope I helped, good luck and thanks for your confidence in our products, Mark Vasilantone, president Vastex International Inc. www.vastex.com | |
  
|