|
| Posted on 4/7/08 at 07:29 AM | |
|
|
We bought a used TAS RA 203 (manufactured in the mid-90's) last year and it's been a workhorse for us until last night. We had to hit the emergency stop when a shirt was not loaded correctly and we had a print head at the first station. After fixing the shirt and resetting the machin to restart, the press rotated to the next station, raised to print/flash, and then didn't move. We let it go about 10-15 seconds (with a 7 second dwell time), and then hit the emergency stop again to investigate. The press wouldn't run after that. From the control panel, we can still move the flood bars and print heads by moving to manual, but the press will not rotate or raise. I called TAS last week and I'll be in touch with them again later today, but wanted to reach out to the boards. We are located about 30 miles northwest of Ft. Worth. Anyone in that area that can help? Thanks, Scott ____________________ Thanks, Scott Hiler Ink'N'Stitch Custom Screen Printing & Embroidery www.InkNStitch.com | |
  
|
