Subject: Re: Re: Re: Aluminum Platens Warping

Remote IP:71.180.209.58
Remote Host:

ScreenPrinters.Net > Boards > Equipment >Re: Re: Re: Aluminum Platens Warping

madman_design Posts like crazy Status: Offline	Posted on 5/3/08 at 08:41 AM
Elvis The King Madman Designs	Most platens are made of 1/4" aluminum, which is pretty tough stuff. Have you tried flattening them back out? You could make a crude metal brake with wood and a bench vise and bend them back to level (or at least close. ____________________ Respect my authoritie! www.myspace.com/elvisart
Elvis The King Madman Designs

This thread:

Aluminum Platens Warping by muskie4424 - on 5/2/08 at 03:57 AM

Re: Aluminum Platens Warping by 244 - on 5/2/08 at 07:30 AM
Re: Aluminum Platens Warping by raygreenwood - on 5/2/08 at 05:47 AM

Re: Re: Aluminum Platens Warping by muskie4424 - on 5/3/08 at 05:01 AM

Re: Re: Re: Aluminum Platens Warping by raygreenwood - on 5/4/08 at 02:22 PM
who made the platens? by socalfmf - on 5/3/08 at 05:33 AM

Re: who made the platens? by muskie4424 - on 5/4/08 at 06:43 PM

Re: Re: who made the platens? by madman_design - on 5/4/08 at 07:22 PM

Re: Re: Re: who made the platens? by muskie4424 - on 5/5/08 at 04:24 AM

Re: Re: Re: Re: who made the platens? by 244 - on 5/5/08 at 06:41 AM
Re: Re: Re: Re: who made the platens? by madman_design - on 5/5/08 at 08:13 AM

Re: Re: Re: Aluminum Platens Warping by madman_design - on 5/3/08 at 08:41 AM
Re: Re: Re: Aluminum Platens Warping by 244 - on 5/3/08 at 12:06 PM

Re: Re: Re: Re: Aluminum Platens Warping by raygreenwood - on 5/4/08 at 02:30 PM

Re: Re: Aluminum Platens Warping by Techman - on 5/3/08 at 05:09 AM

Excessive Heat ! by Roger_Jennings - on 5/6/08 at 08:40 AM

Re: Excessive Heat ! by muskie4424 - on 5/6/08 at 07:48 PM

Re: Re: Excessive Heat ! by Roger_Jennings - on 5/7/08 at 08:25 AM

Re: Re: Re: Excessive Heat ! by muskie4424 - on 5/7/08 at 10:17 AM

[ Home | ScreenPrinters.net | Feedback | Register | Profile | FAQ | Help ] [ Login | Lost Password ]

Only registered members may post to the Boards.

Need to register? It's free!

Having trouble posting after logging in? Click Here