|
| Posted on 5/20/06 at 02:15 PM | |
| I've used Xante's for close to ten years. I've found the frosted film from anyone works fine, providing you run it through Xantes processor to increase the opacity. For multicolor printing I run the films through the printer first to preshrink the film and then run it through a second time to print the image on the film. Laser printers heat the film, causing it to change size. If you screen print multicolor heat transfers, paper products or vinyl, running the substrate through the dryer first gives you the same benefit-eliminating substrate shrinkage and yielding better registration. | ||
 
|