|
| Posted on 9/17/07 at 07:59 AM | |
|
Ok, Couple questions. Was it doing this before or did it just start? Are you mechanically inclined at all?? I ask that because my machine sometimes shows a time out and I check all the normal places stuff jambs, I shut it off, and restart it. Most of the time a "reboot" will start up where it got stuck. Then (here is where mechanics come in) if that does not do it, I shut it off, unplug it and pull the covers off and check the fuses. If those are good then maybe turn the servos just a little to unjamb or see if something is stuck. This is only by hand, if you have to use a wrench to turn a servo you definately have something stuck or broken. Put the covers back on turn it on and see if it gives you an error. If those do not work then I would call Mike at Masis and see if he can help you diagnose the driver boards. Ed groups.yahoo.com/melcosuperstar | ||
 
|