Subject: Re: Bad Ulano

Remote IP:65.33.161.202
Remote Host:
ScreenPrinters.Net > Boards > Ulano >Re: Bad Ulano


Over 100 posts
Status: Offline

Posted on 3/6/07 at 03:28 AM  


Tom Pitman
Owner
Pitman Graphics

I've used the QX-1 and the exposures are quite a bit longer than with QXT or any of the other similar emulsions. If I'm not mistaken, QX1 is a hybrid that has long shelf life but has the exposure latitude of the dual cures, which means they take about 4 times longer to expose . I think my exposures were in the range of 12 or more minutes using 6 unfiltered blacklights at about 3 inches apart and about 3 inches away from the screen. I think you're severely underexposing the screen with only 1 25w regular fluorescent bulb, to put it mildly.  
View Member's Profile  View All Posts By This Member     
 
This thread:
[ Home | ScreenPrinters.net | Feedback | Register | Profile | FAQ | Help ] [ Login | Lost Password ]

Only registered members may post to the Boards.

Need to register? It's free!

Having trouble posting after logging in? Click Here