|
| Posted on 12/22/05 at 08:51 AM | |
|
|
Hello Scubadog, You may be referring to a very, very early generation of our frames. It is a model M1-X which we obviously no longer manufacture. It had black plastic nylon composite corners, endplugs and the rollers were much thinner (1 1/16"  . Back then the M1-X was able to handle up to 14 newtons which printers thought was ridiculously high.The new MZX-UL is the current model and has all metal parts (no plastic or nylon) with a much thicker roller diameter (1 7/16" . The MZX-UL is by far a much stronger frame built to handle greater screen tensions that many of the mesh manufacturers now offer.You'll only find the M1-X frames floating around in the "used market". Not sure if this is the frame you are referring to but now you at least now know of ours. | |
  
|
