|
| Posted on 8/19/06 at 01:17 AM | |
|
|
I set mine by putting a 3/16 thick piece of board same width and length as the pallet on the pallet then put down the screen on top of that. Loosen the off contact, jiggle the screen to make sure it is flat. Tighten off contact. Lift the screen, take away the board, put down the screen and check off contact. This should give you an off contact when a shirt is loaded of about 1/8 inch. ____________________ Riley Hopkins 8/4 WorkHorse Point 1K Exposure Unit WorkHorse Primus 18x20 Flash WorkHorse Compact Conveyer Dryer Dual 500 Mac G4, 1.5GB RAM, OS X 10.3.9, 1TB storage | |
 
|