|
| Posted on 10/8/06 at 09:04 AM | |
|
Make sure your squeegee angle is proper. It is very common for new printers to lay their squeegee too flat when they print. This causes the ink to mash into the garment instead of shearing off the mesh. Try 60-75 degree squeegee angle when pulling. The softer the squeegee the higher the angle. Make sure you are printing with the edge of the squeegee and not the side. ____________________ Bill Redeker Tech Support SPS (412)600-6789 b.redeker@comcast.net | ||
  
|