|
| Posted on 5/7/08 at 09:07 PM | |
|
Michael-I think there is an M&R tech living in KC. You may want to check. This is a pretty simple procedure but requires a special tool. Depending on the age of the press, you may want to consider replacing the followers. These are not that expensive. These are the rollers that go up into the forks. Look at yours. See if they are loose. Degrease them with an aerosol degreaser and wiggle them. Look to see if they are loose. Inspect the forks for wear too. Be sure to add lubricant when finished. http://www.bdi-usa.com/Bearings/BallandRoller.aspx [Edited on 5/7/08 by bearwhiz] | ||
  
|