Subject: Re: Re: MINI SPRINT POSITIONING

Remote IP:66.168.215.47
Remote Host:

ScreenPrinters.Net > Boards > M&R Printing Equipment >Re: Re: MINI SPRINT POSITIONING

dagger_graphics Under 100 posts Status: Offline	Posted on 5/3/08 at 11:10 AM
	Thanks for the help, I though it would be possible that way, just wasn't sure if you could reverse the belt direction. Do you have any thoughts on how much room I should have on either side of the pres?

This thread:

MINI SPRINT POSITIONING by dagger_graphics - on 5/2/08 at 12:15 PM

Re: MINI SPRINT POSITIONING by TBaldino - on 5/2/08 at 01:47 PM

Re: Re: MINI SPRINT POSITIONING by dagger_graphics - on 5/2/08 at 08:40 PM

Re: Re: Re: MINI SPRINT POSITIONING by TBaldino - on 5/3/08 at 06:27 AM

Re: Re: Re: Re: MINI SPRINT POSITIONING by jepaul - on 5/3/08 at 07:49 PM

You must be double deep under cover or maybe by BrotherIndy - on 5/5/08 at 08:22 AM

Re: MINI SPRINT POSITIONING by thomas_boyd - on 5/3/08 at 09:24 AM

Re: Re: MINI SPRINT POSITIONING by dagger_graphics - on 5/3/08 at 11:10 AM

Re: Re: Re: MINI SPRINT POSITIONING by thomas_boyd - on 5/4/08 at 04:17 PM
Re: Re: Re: MINI SPRINT POSITIONING by thomas_boyd - on 5/4/08 at 04:32 PM

Re: Re: MINI SPRINT POSITIONING by thomas_boyd - on 5/3/08 at 09:47 AM

Re: Re: Re: MINI SPRINT POSITIONING by 244 - on 5/3/08 at 12:35 PM

[ Home | ScreenPrinters.net | Feedback | Register | Profile | FAQ | Help ] [ Login | Lost Password ]

Only registered members may post to the Boards.

Need to register? It's free!

Having trouble posting after logging in? Click Here