|
| Posted on 5/3/08 at 09:24 AM | |
|
Hello Dagger Graphics, You cannot relocate the control panel on the dryer, it would involve too much rewiring. However, you could reverse the direction of the belt and flip the dryer around so the control panel is on the side you want. This would be easy if your infeed length is the same as the outfeed, and you have the same amount of slave sections attached to the sides of your burner sections. If not, you can disassemble the dryer and turn the burner section around, but you would have to rewire the belt motion detector and belt motor drive circuits. I've done it, it in not too difficult, but I'm a tech. ____________________ Thomas Boyd President Boyd Screen Tech bst6890795 at yah00 d0t c0m (email altered to fool spambots) | ||
 
|
