Subject: Re: I have a better one

Remote IP:57.77.11.4
Remote Host:

ScreenPrinters.Net > Boards > Newbies >Re: I have a better one

Flick Under 100 posts Status: Offline	Posted on 5/16/08 at 10:11 AM
Philip Frey Owner Chipped Tooth Tees	I have a friend in the machining business who suggested a "tool aluminum". I have been using these for 2 years on a 4/1 manual and curing with flash. No warpage yet. ____________________ pfrey@omuonline.net
Philip Frey Owner Chipped Tooth Tees

This thread:

Making your own platens by Hokie978 - on 5/15/08 at 11:05 AM

Re: Making your own platens by screenxpress - on 5/15/08 at 11:23 AM
Re: Making your own platens by stitch101 - on 5/15/08 at 11:39 AM

Where can you get melamine? NP by Hokie978 - on 5/15/08 at 11:46 AM

Re: Making your own platens by scobeypeterman - on 5/15/08 at 12:24 PM

THAT......is a Hellova Deal.............NFP by screenxpress - on 5/15/08 at 12:34 PM

I have a better one by Inkman996 - on 5/15/08 at 01:03 PM

Re: I have a better one by Flick - on 5/16/08 at 10:11 AM
why not start a platten biz? NP by xshawnlodx - on 5/15/08 at 10:23 PM

Would be nice but...... by Inkman996 - on 5/16/08 at 04:53 AM

Go to your local counter maker.......NFP by dandan - on 5/15/08 at 02:24 PM

Re: Go to your local counter maker.......NFP by imagep - on 5/15/08 at 04:16 PM

Re: Making your own platens by Shanarchy - on 5/15/08 at 03:15 PM

[ Home | ScreenPrinters.net | Feedback | Register | Profile | FAQ | Help ] [ Login | Lost Password ]

Only registered members may post to the Boards.

Need to register? It's free!

Having trouble posting after logging in? Click Here