Subject: Re: Re: Re: Re: Re: What to buy?

Remote IP:69.181.113.219
Remote Host:

ScreenPrinters.Net > Boards > Pad Printing >Re: Re: Re: Re: Re: What to buy?

djkees Under 100 posts Status: Offline	Posted on 5/8/08 at 10:34 PM
Dan Kees Owner PromoTec	Hi Ken, TPR ink does not need to be heat cured. I use it on USB drives, and it is dry in about 5 seconds. Any comparable ink series should act the same. You should not need any hardener (catalyst) for ABS. I have been exploring more of the pad printing videos on YouTube, and I highly suggest checking them out. There are a few on the Printa system. Sounds like you're off to a good start, Dan
Dan Kees Owner PromoTec

This thread:

What to buy? by kdmeissner - on 5/6/08 at 04:34 PM

Re: What to buy? by djkees - on 5/7/08 at 01:29 AM

Re: Re: What to buy? by royster13 - on 5/7/08 at 09:17 AM

Re: Re: Re: What to buy? by kdmeissner - on 5/7/08 at 10:40 AM
Re: Re: Re: What to buy? by djkees - on 5/7/08 at 11:36 PM

Re: Re: What to buy? by kdmeissner - on 5/7/08 at 10:35 AM

Re: Re: Re: What to buy? by djkees - on 5/7/08 at 11:32 PM

Re: Re: Re: Re: What to buy? by kdmeissner - on 5/8/08 at 09:02 PM

Re: Re: Re: Re: Re: What to buy? by djkees - on 5/8/08 at 10:34 PM

Re: Re: Re: Re: Re: Re: What to buy? by kdmeissner - on 5/10/08 at 05:59 AM

Re: What to buy? by TEE-Riffik - on 5/8/08 at 05:52 AM
Re: What to buy? by amgraffiti - on 5/8/08 at 01:30 PM
Re: What to buy? by SVO-Ed - on 5/9/08 at 01:30 PM

Re: Re: What to buy? by kdmeissner - on 5/12/08 at 02:05 PM

Re: What to buy? by Panker - on 5/9/08 at 06:34 PM

Re: Re: What to buy? by kdmeissner - on 5/12/08 at 02:18 PM

[ Home | ScreenPrinters.net | Feedback | Register | Profile | FAQ | Help ] [ Login | Lost Password ]

Only registered members may post to the Boards.

Need to register? It's free!

Having trouble posting after logging in? Click Here