M&R Printing Equipment

This is the M&R Printing Equipment forum. This forum is a place to have a professional discussion about M&R Printing Equipment's products and services. This is the place to discuss technical issues, product features, and to give suggestions on using their products, etc. It is NOT a place to 'blast' the company. It is not a place to buy or sell their products. Posts from M&R Printing Equipment are appropriate and encouraged.

[ POST MESSAGE ] [ Home | ScreenPrinters.net | Feedback | Register | Profile | FAQ | Help ] [ Login | Lost Password ]

ScreenPrinters.Net > Boards > M&R Printing Equipment

MSP 3140 by splash07 - on 5/12/08 at 09:54 AM

Re: MSP 3140 by RonH - on 5/12/08 at 03:38 PM

Hot Rod by outdabox - on 5/8/08 at 07:11 PM

Re: Hot Rod by TBaldino - on 5/9/08 at 08:31 AM

Re: Re: Hot Rod by jepaul - on 5/9/08 at 01:18 PM

Re: Re: Re: Hot Rod by kirby - on 5/9/08 at 09:54 PM

Re: Re: Re: Re: Hot Rod by outdabox - on 5/10/08 at 04:31 AM

Re: Re: Re: Re: Re: Hot Rod by TBaldino - on 5/10/08 at 07:02 AM

Re: Re: Re: Re: Re: Re: Hot Rod by bearwhiz - on 5/12/08 at 02:06 PM

Re: Hot Rod by CaptBret - on 5/9/08 at 05:56 AM
Re: Hot Rod by bearwhiz - on 5/9/08 at 05:55 AM

Manual Emulsion Coater by HTT-130 - on 5/8/08 at 04:49 PM

Re: Manual Emulsion Coater by raygreenwood - on 5/9/08 at 06:54 AM

Re: Re: Manual Emulsion Coater by HTT-130 - on 5/16/08 at 06:02 AM

10/12 Challenger registration by phaser - on 5/7/08 at 01:04 PM

Re: 10/12 Challenger registration by phaser - on 5/9/08 at 10:00 AM

Re: Re: 10/12 Challenger registration by bimmridder - on 5/9/08 at 02:59 PM

Re: 10/12 Challenger registration by pressstan - on 5/8/08 at 06:47 AM
Re: 10/12 Challenger registration by NOORIND - on 5/8/08 at 12:10 AM
Re: 10/12 Challenger registration by TBaldino - on 5/7/08 at 05:04 PM
Re: 10/12 Challenger registration by jepaul - on 5/7/08 at 02:20 PM

Re: Re: 10/12 Challenger registration by bearwhiz - on 5/7/08 at 09:07 PM

Postive alignment on MSP 3140 by dkutz - on 5/7/08 at 12:31 PM

Re: Postive alignment on MSP 3140 by EP - on 5/9/08 at 04:49 PM
Re: Postive alignment on MSP 3140 by n8ivkjun - on 5/8/08 at 04:54 AM
Re: Postive alignment on MSP 3140 by TBaldino - on 5/7/08 at 04:52 PM

Re: Re: Postive alignment on MSP 3140 by socalfmf - on 5/7/08 at 05:29 PM

Re: Re: Re: Postive alignment on MSP 3140 by dkutz - on 5/8/08 at 10:37 AM

Re: Re: Re: Re: Postive alignment on MSP 3140 by Fish_Out_Of_Water - on 5/8/08 at 04:03 PM

m&r chameleon price by NOORIND - on 5/7/08 at 11:05 AM
Hyper Flash Question by swmankin - on 5/5/08 at 08:12 AM

Re: Hyper Flash Question by TBaldino - on 5/5/08 at 09:37 AM

MINI SPRINT POSITIONING by dagger_graphics - on 5/2/08 at 12:15 PM

Re: MINI SPRINT POSITIONING by thomas_boyd - on 5/3/08 at 09:24 AM

Re: Re: MINI SPRINT POSITIONING by dagger_graphics - on 5/3/08 at 11:10 AM

Re: Re: Re: MINI SPRINT POSITIONING by thomas_boyd - on 5/4/08 at 04:32 PM
Re: Re: Re: MINI SPRINT POSITIONING by thomas_boyd - on 5/4/08 at 04:17 PM

Re: Re: MINI SPRINT POSITIONING by thomas_boyd - on 5/3/08 at 09:47 AM

Re: Re: Re: MINI SPRINT POSITIONING by 244 - on 5/3/08 at 12:35 PM

Re: MINI SPRINT POSITIONING by TBaldino - on 5/2/08 at 01:47 PM

Re: Re: MINI SPRINT POSITIONING by dagger_graphics - on 5/2/08 at 08:40 PM

You must be double deep under cover or maybe by BrotherIndy - on 5/5/08 at 08:22 AM
Re: Re: Re: MINI SPRINT POSITIONING by TBaldino - on 5/3/08 at 06:27 AM

Re: Re: Re: Re: MINI SPRINT POSITIONING by jepaul - on 5/3/08 at 07:49 PM

New Auto Press Up and Running by outdabox - on 5/1/08 at 06:12 PM

Re: New Auto Press Up and Running by glenc - on 5/2/08 at 06:12 AM
Re: New Auto Press Up and Running by dagger_graphics - on 5/1/08 at 07:12 PM

Economax Help by jmd561 - on 4/27/08 at 10:40 AM

Re: Economax Help by TBaldino - on 4/27/08 at 03:31 PM
Re: Economax Help by jepaul - on 4/27/08 at 03:03 PM

compressor for old m&r challenger by NOORIND - on 4/25/08 at 09:29 AM

Re: compressor for old m&r challenger by TBaldino - on 4/25/08 at 10:32 AM

Why I love my Tri-Loc by socalfmf - on 4/24/08 at 04:49 PM

Re: Why I love my Tri-Loc by pressstan - on 4/25/08 at 06:47 AM

Love the brick....nfp by jepaul - on 4/26/08 at 08:25 PM

Having trouble With my Flash on Sportsman by RRCTees - on 4/24/08 at 07:04 AM

Re: Having trouble With my Flash on Sportsman by TBaldino - on 4/24/08 at 10:03 AM

What to look for in a Mini Sprint? by dagger_graphics - on 4/18/08 at 10:25 PM

Re: What to look for in a Mini Sprint? by 244 - on 4/19/08 at 11:13 AM

Re: Re: What to look for in a Mini Sprint? by pressstan - on 4/21/08 at 07:35 AM

Re: Re: Re: What to look for in a Mini Sprint? by dagger_graphics - on 4/21/08 at 07:57 AM

Re: Re: Re: Re: What to look for in a Mini Sprint? by 244 - on 4/22/08 at 05:07 AM

Diamondback Production Speed by outdabox - on 4/17/08 at 08:24 PM

Re: Diamondback Production Speed by outdabox - on 4/24/08 at 02:41 PM
Re: Diamondback Production Speed by TBaldino - on 4/18/08 at 06:53 AM

Re: Re: Diamondback Production Speed by HTT-130 - on 4/20/08 at 04:25 AM

Re: Re: Re: Diamondback Production Speed by socalfmf - on 4/20/08 at 12:15 PM

Re: Re: Re: Re: Diamondback Production Speed by pressstan - on 4/24/08 at 08:26 AM

Re: Re: Re: Diamondback Production Speed by 244 - on 4/20/08 at 11:39 AM

Re: Re: Re: Re: Diamondback Production Speed by raygreenwood - on 4/21/08 at 04:59 AM

Re: Re: Re: Re: Re: Diamondback Production Speed by drdot - on 4/22/08 at 07:30 AM

Re: Re: Re: Re: Re: Re: Diamondback Production Speed by raygreenwood - on 4/23/08 at 12:39 PM
Re: Re: Re: Re: Re: Re: Diamondback Production Speed by HTT-130 - on 4/23/08 at 01:56 AM

Re: Diamondback Production Speed by jepaul - on 4/18/08 at 06:21 AM

Re: Re: Diamondback Production Speed by raygreenwood - on 4/18/08 at 10:27 AM

Re: Re: Re: Diamondback Production Speed by CALIBRATED - on 4/19/08 at 10:32 AM

Random Question... by jepaul - on 4/15/08 at 07:49 PM

Re: Random Question... by CALIBRATED - on 4/19/08 at 05:33 PM

Re: Re: Random Question... by HTT-130 - on 4/20/08 at 04:28 AM

Re: Random Question... by TBaldino - on 4/16/08 at 06:29 AM

Re: Re: Random Question... by jepaul - on 4/16/08 at 07:09 AM

Great Idea! by CaptBret - on 4/17/08 at 05:16 AM
Re: Re: Re: Random Question... by TBaldino - on 4/16/08 at 12:09 PM

Re: Re: Re: Re: Random Question... by fltrsei - on 4/17/08 at 08:39 AM

Maxi cure dryer control panel by projay - on 4/14/08 at 07:38 PM

Re: Maxi cure dryer control panel by TBaldino - on 4/15/08 at 04:54 AM

Pallet Arm Supports by Inner_City_Empire - on 4/13/08 at 08:24 AM

Re: Pallet Arm Supports by TBaldino - on 4/14/08 at 05:28 AM

Blue Max II upgrade help by blacksheephybrid - on 4/12/08 at 11:56 PM

Re: Blue Max II upgrade help by TBaldino - on 4/14/08 at 05:27 AM
Re: Blue Max II upgrade help by Inner_City_Empire - on 4/13/08 at 08:45 AM

Gauntlet 6/8 flash placement by projay - on 4/10/08 at 09:12 PM

Re: Gauntlet 6/8 flash placement by Crofty - on 4/12/08 at 06:03 PM
Re: Gauntlet 6/8 flash placement by TBaldino - on 4/11/08 at 06:00 AM

Re: Re: Gauntlet 6/8 flash placement by socalfmf - on 4/11/08 at 06:14 AM

M&R Economax D by allmeshedup - on 4/9/08 at 06:36 AM

Re: M&R Economax D by TBaldino - on 4/10/08 at 06:17 AM

A new discussion on Tri-Loc by Fish_Out_Of_Water - on 4/8/08 at 02:40 AM

Re: A new discussion on Tri-Loc by pressstan - on 4/8/08 at 06:54 AM

Hey Stan, Call me please! by CaptBret - on 4/10/08 at 06:42 PM
Re: Re: A new discussion on Tri-Loc by socalfmf - on 4/8/08 at 04:16 PM

Re: Re: Re: A new discussion on Tri-Loc by pressstan - on 4/9/08 at 06:03 AM

Re: Re: Re: Re: A new discussion on Tri-Loc by raygreenwood - on 4/10/08 at 12:45 PM

Re: Re: Re: Re: Re: A new discussion on Tri-Loc by n8ivkjun - on 4/10/08 at 04:41 PM

Re: Re: Re: Re: Re: Re: A new discussion on Tri-Loc by CALIBRATED - on 4/11/08 at 08:41 AM

Re: Re: Re: Re: Re: Re: Re: A new discussion on Tri-Loc by raygreenwood - on 4/11/08 at 01:10 PM

Maxi-Cure Dryer Issues! by projay - on 4/6/08 at 06:29 AM

Re: Maxi-Cure Dryer Issues! by TBaldino - on 4/6/08 at 07:22 AM

Press Distance from Dryer by n8ivkjun - on 4/5/08 at 08:04 AM

Re: Press Distance from Dryer by socalfmf - on 4/8/08 at 06:53 PM
Re: Press Distance from Dryer by bearwhiz - on 4/7/08 at 11:16 AM
Re: Press Distance from Dryer by TBaldino - on 4/5/08 at 11:15 AM

Re: Re: Press Distance from Dryer by TBaldino - on 4/5/08 at 03:56 PM

Re: Re: Re: Press Distance from Dryer by n8ivkjun - on 4/5/08 at 04:24 PM

Re: Re: Press Distance from Dryer by thomas_boyd - on 4/5/08 at 12:20 PM

Who uses Tri-Loc in a manual only shop? by Fish_Out_Of_Water - on 3/31/08 at 07:54 PM

Re: Who uses Tri-Loc in a manual only shop? by CALIBRATED - on 4/2/08 at 05:13 PM

Re: Re: Who uses Tri-Loc in a manual only shop? by patriciago - on 4/3/08 at 07:53 AM

Re: Re: Re: Who uses Tri-Loc in a manual only shop? by Andy - on 4/3/08 at 11:51 AM

Re: Re: Re: Re: Who uses Tri-Loc in a manual only shop? by scubadog - on 4/7/08 at 05:18 AM
Re: Re: Re: Re: Who uses Tri-Loc in a manual only shop? by CALIBRATED - on 4/3/08 at 08:12 PM

Re: Re: Re: Re: Re: Who uses Tri-Loc in a manual only shop? by MRWally - on 4/4/08 at 01:43 PM

Re: Re: Re: Re: Re: Re: Who uses Tri-Loc in a manual only shop? by CALIBRATED - on 4/8/08 at 09:03 AM

Explain by Inkman996 - on 4/8/08 at 10:49 AM

Re: Re: Re: Re: Re: Who uses Tri-Loc in a manual only shop? by scubadog - on 4/4/08 at 01:37 PM

Re: Re: Re: Re: Who uses Tri-Loc in a manual only shop? by pressstan - on 4/3/08 at 03:51 PM

Re: Re: Who uses Tri-Loc in a manual only shop? by TBaldino - on 4/3/08 at 06:18 AM

Re: Re: Re: Who uses Tri-Loc in a manual only shop? by fltrsei - on 4/4/08 at 09:25 AM
Re: Re: Re: Who uses Tri-Loc in a manual only shop? by CALIBRATED - on 4/3/08 at 09:55 AM

The Tri Loc did not fit my Amergraph 335, but ... by CaptBret - on 4/4/08 at 07:02 AM
Re: Re: Re: Re: Who uses Tri-Loc in a manual only shop? by TBaldino - on 4/3/08 at 11:19 AM

Re: Re: Re: Re: Re: Who uses Tri-Loc in a manual only shop? by CALIBRATED - on 4/3/08 at 07:27 PM

I agree by CaptBret - on 4/3/08 at 07:58 AM

Re: Re: Who uses Tri-Loc in a manual only shop? by Fish_Out_Of_Water - on 4/2/08 at 05:28 PM

Re: Who uses Tri-Loc in a manual only shop? by TBaldino - on 4/1/08 at 05:30 AM

Re: Re: Who uses Tri-Loc in a manual only shop? by thomas_boyd - on 4/5/08 at 08:29 AM

Re: Re: Re: Who uses Tri-Loc in a manual only shop? by TBaldino - on 4/5/08 at 05:49 PM

Gauntlet - service manual by edgrimly - on 3/31/08 at 07:08 AM

Re: Gauntlet - service manual by 244 - on 4/1/08 at 07:58 AM
Re: Gauntlet - service manual by Andy - on 3/31/08 at 07:19 AM
Re: Gauntlet - service manual by edgrimly - on 3/31/08 at 07:16 AM

Chameleon 6/6 by jmd561 - on 3/30/08 at 05:01 PM

Re: Chameleon 6/6-Camber adjustment control by Andy - on 3/31/08 at 07:38 AM
Re: Chameleon 6/6 by 244 - on 3/31/08 at 07:09 AM

Re: Re: Chameleon 6/6 by jmd561 - on 3/31/08 at 05:38 PM

Re: Re: Re: Chameleon 6/6 by 244 - on 4/1/08 at 08:06 AM
Re: Re: Re: Chameleon 6/6 by Andy - on 4/1/08 at 07:37 AM

Moving sportsman to different next door building by patriciago - on 3/28/08 at 12:37 PM

Re: Moving sportsman to different next door building by TBaldino - on 3/29/08 at 08:25 AM

Re: Re: Moving sportsman to different next door building by patriciago - on 3/30/08 at 11:56 AM

Re: Re: Re: Moving sportsman to different next door building by jepaul - on 3/30/08 at 05:46 PM
Re: Re: Re: Moving sportsman to different next door building by TBaldino - on 3/30/08 at 12:33 PM

Re: Re: Re: Re: Moving sportsman to different next door building by bearwhiz - on 3/30/08 at 05:08 PM

Give me a call by jepaul - on 3/28/08 at 04:01 PM
Re: Moving sportsman to different next door building by Buddha57 - on 3/28/08 at 01:28 PM

Squeeges for new diamondback by splash07 - on 3/26/08 at 07:51 AM

Re: Squeeges for new diamondback by bearwhiz - on 3/27/08 at 10:59 AM
Re: Squeeges for new diamondback by TBaldino - on 3/26/08 at 10:03 AM

Re: Re: Squeeges for new diamondback by Andy - on 3/26/08 at 10:11 AM

Diamondback Compressor Recommendation by dagger_graphics - on 3/24/08 at 10:46 AM

Re: Diamondback Compressor Recommendation by hennecy - on 3/27/08 at 05:45 AM

Re: Re: Diamondback Compressor Recommendation by dagger_graphics - on 3/28/08 at 12:43 PM

Re: Re: Re: Diamondback Compressor Recommendation by Saxtoon - on 4/4/08 at 09:17 AM

Re: Diamondback Compressor Recommendation by 244 - on 3/25/08 at 10:36 AM

Re: Re: Diamondback Compressor Recommendation by dagger_graphics - on 3/26/08 at 08:56 AM

Re: Re: Re: Diamondback Compressor Recommendation by 244 - on 3/26/08 at 11:54 AM

Re: Re: Re: Re: Diamondback Compressor Recommendation by dagger_graphics - on 3/26/08 at 12:38 PM

Re: Re: Re: Re: Re: Diamondback Compressor Recommendation by thumprnt - on 3/27/08 at 09:31 PM
Re: Re: Re: Re: Re: Diamondback Compressor Recommendation by 244 - on 3/26/08 at 05:52 PM

Re: Re: Re: Re: Re: Re: Diamondback Compressor Recommendation by 244 - on 3/28/08 at 08:02 AM

Re: Diamondback Compressor Recommendation by dagger_graphics - on 3/24/08 at 10:56 AM

Umm tough one. by jepaul - on 3/24/08 at 03:45 PM

Re: Umm tough one. by dagger_graphics - on 3/24/08 at 07:35 PM

Gauntlet 8/10 Compressor Specs? by badskulls - on 3/21/08 at 02:36 PM

Re: Gauntlet 8/10 Compressor Specs? by TBaldino - on 3/25/08 at 11:03 AM
Re: Gauntlet 8/10 Compressor Specs? by beyondvertical - on 3/23/08 at 06:28 PM
Not specific specs but... by jepaul - on 3/21/08 at 04:46 PM

Tony and Rich? Oven question? by jepaul - on 3/19/08 at 11:00 AM

Thanks Guys by jepaul - on 3/20/08 at 08:59 PM
Re: Tony and Rich? Oven question? by bearwhiz - on 3/20/08 at 06:40 PM
Re: Tony and Rich? Oven question? by TBaldino - on 3/20/08 at 06:29 AM

Pallet rubber coming up around edges by projay - on 3/16/08 at 09:56 AM

Re: Pallet rubber coming up around edges by 244 - on 3/16/08 at 07:35 PM
Re: Pallet rubber coming up around edges by bearwhiz - on 3/16/08 at 07:21 PM

M& R sportsman vs. Stratus II Anatol by Joetoken - on 3/14/08 at 11:24 AM

Re: M& R sportsman vs. Stratus II Anatol by socalfmf - on 3/14/08 at 02:02 PM

a little help on the sidewinder... by teddyismyhomeboy - on 3/10/08 at 10:57 PM

Re: a little help on the sidewinder... by 244 - on 3/11/08 at 06:54 AM

Re: Re: a little help on the sidewinder... by Fish_Out_Of_Water - on 3/12/08 at 05:32 PM

Re: a little help on the sidewinder... by TBaldino - on 3/11/08 at 05:16 AM

Screen taping?? by projay - on 3/10/08 at 09:37 PM

Re: Screen taping?? by Andy - on 3/11/08 at 08:54 AM

Chameleon & Newman M3 by dagger_graphics - on 3/5/08 at 10:58 PM

Re: Chameleon & Newman M3 by TBaldino - on 3/6/08 at 07:56 AM

Re: Re: Chameleon & Newman M3 by dagger_graphics - on 3/6/08 at 08:03 AM

Re: Re: Re: Chameleon & Newman M3 by CaptBret - on 3/6/08 at 01:36 PM

Replacing squeegees, need info by projay - on 3/5/08 at 08:19 PM

Sharpener? by jepaul - on 3/19/08 at 10:47 AM
Re: Replacing squeegees, need info by bearwhiz - on 3/6/08 at 07:06 AM

Arm Springs by DREAMSCAPE - on 3/4/08 at 02:52 PM

Re: Arm Springs by 244 - on 3/4/08 at 04:18 PM

6/8 gauntlet moving during operation by projay - on 3/3/08 at 09:54 PM

Re: 6/8 gauntlet moving during operation by bearwhiz - on 3/4/08 at 12:01 PM
Re: 6/8 gauntlet moving during operation by squeegie - on 3/4/08 at 08:27 AM
Re: 6/8 gauntlet moving during operation by thumprnt - on 3/4/08 at 06:05 AM
Re: 6/8 gauntlet moving during operation by bimmridder - on 3/4/08 at 02:09 AM

Re: Re: 6/8 gauntlet moving during operation by 244 - on 3/4/08 at 08:30 AM

Pallet Adhesive by HTT-130 - on 3/1/08 at 02:26 PM

Re: Pallet Adhesive by bensdman - on 3/7/08 at 11:49 PM

Re: Re: Pallet Adhesive by squeegie - on 3/8/08 at 08:49 AM

Re: Re: Re: Pallet Adhesive by fltrsei - on 3/10/08 at 07:40 AM

Re: Re: Re: Re: Pallet Adhesive by squeegie - on 3/11/08 at 06:50 AM

Re: Pallet Adhesive by muskie4424 - on 3/3/08 at 04:26 PM

Re: Re: Pallet Adhesive by projay - on 3/3/08 at 09:30 PM

Re: Pallet Adhesive by thumprnt - on 3/2/08 at 06:49 PM
Re: Pallet Adhesive by fltrsei - on 3/2/08 at 09:32 AM
Re: Pallet Adhesive by DavidESP - on 3/2/08 at 01:02 AM
Re: Pallet Adhesive by seventhsin - on 3/1/08 at 07:40 PM
Re: Pallet Adhesive by n8ivkjun - on 3/1/08 at 04:17 PM
Re: Pallet Adhesive by socalfmf - on 3/1/08 at 02:58 PM

Off Contact by HTT-130 - on 2/28/08 at 07:06 PM

other Diamondback stuff by terryei - on 3/2/08 at 07:48 PM

Re: other Diamondback stuff by 244 - on 3/3/08 at 09:25 AM

tri lock later? by terryei - on 3/3/08 at 04:34 PM

Re: tri lock later? by bimmridder - on 3/4/08 at 02:08 AM

Re: Re: tri lock later? by GKitson - on 3/5/08 at 04:09 AM

Re: Off Contact by TBaldino - on 2/29/08 at 06:57 AM

Re: Re: Off Contact by HTT-130 - on 2/29/08 at 08:44 AM

Re: Off Contact by ASAPSCREENPRINT - on 2/29/08 at 06:20 AM

service call- thank you by grubb13 - on 2/27/08 at 02:14 PM

Re: service call- thank you by 244 - on 2/28/08 at 12:59 PM

service call, Thank you by grubb13 - on 2/27/08 at 02:10 PM
Maxi-Cure exhaust questions by mk162 - on 2/22/08 at 07:41 AM

Re: Maxi-Cure exhaust questions by bearwhiz - on 2/25/08 at 12:06 PM

Interesting... by mk162 - on 2/27/08 at 08:44 AM

Re: Interesting... by 244 - on 2/27/08 at 08:49 AM

Re: Maxi-Cure exhaust questions by TBaldino - on 2/22/08 at 12:20 PM
Re: Maxi-Cure exhaust questions by Andy - on 2/22/08 at 11:54 AM

Thanks!!! NP by mk162 - on 2/27/08 at 08:45 AM

Diamondback Install !! by Logo01 - on 2/22/08 at 05:43 AM

Re: Diamondback Install !! by splash07 - on 2/26/08 at 08:30 AM

Wanted: Nuarc 3140 exposure unit by projay - on 2/21/08 at 08:45 PM
grease? by terryei - on 2/21/08 at 08:36 PM

Re: grease? by Andy - on 2/22/08 at 11:06 AM

wanted: M&R Quartz Flash 18x22 by apparelgraphics - on 2/19/08 at 06:11 PM

Re: wanted: M&R Quartz Flash 18x22 by socalfmf - on 2/20/08 at 06:55 AM

Re: Re: wanted: M&R Quartz Flash 18x22 by ASAPSCREENPRINT - on 2/20/08 at 07:42 AM

Re: Re: Re: wanted: M&R Quartz Flash 18x22 by apparelgraphics - on 2/20/08 at 10:21 AM

now ..WHY MHM? by ASAPSCREENPRINT - on 2/20/08 at 01:51 PM

Sprint 2000 by grubb13 - on 2/18/08 at 10:30 AM

Re: Sprint 2000 by 244 - on 2/18/08 at 11:51 AM

Re: Re: Sprint 2000 by grubb13 - on 2/18/08 at 02:05 PM

Re: Re: Re: Sprint 2000 by 244 - on 2/18/08 at 02:48 PM

Re: Re: Re: Re: Sprint 2000 by grubb13 - on 2/19/08 at 07:08 AM

fusion dryer??? by vicb - on 2/18/08 at 10:15 AM

Re: fusion dryer??? by 244 - on 2/18/08 at 11:48 AM

Thanks!!! by vicb - on 2/18/08 at 12:35 PM

M&R Sidewinder vs Anatol Heavy Duty by BlueZombie - on 2/16/08 at 04:17 PM

Re: M&R Sidewinder vs Anatol Heavy Duty by ASAPSCREENPRINT - on 2/20/08 at 05:00 AM

Re: Re: M&R Sidewinder vs Anatol Heavy Duty by CALIBRATED - on 2/21/08 at 08:00 AM

Re: Re: Re: M&R Sidewinder vs Anatol Heavy Duty by 244 - on 2/23/08 at 06:03 AM
Re: Re: Re: M&R Sidewinder vs Anatol Heavy Duty by ASAPSCREENPRINT - on 2/21/08 at 04:51 PM

Re: Re: Re: Re: M&R Sidewinder vs Anatol Heavy Duty by CALIBRATED - on 2/21/08 at 07:12 PM

all that said im sticking with M/R..18 YEARS and happy by ASAPSCREENPRINT - on 2/22/08 at 09:43 AM

Re: Re: Re: M&R Sidewinder vs Anatol Heavy Duty by socalfmf - on 2/21/08 at 03:47 PM

Re: Re: Re: Re: M&R Sidewinder vs Anatol Heavy Duty by CALIBRATED - on 2/21/08 at 06:40 PM

Re: Re: Re: Re: Re: M&R Sidewinder vs Anatol Heavy Duty by 244 - on 2/23/08 at 06:14 AM
Re: Re: Re: Re: Re: M&R Sidewinder vs Anatol Heavy Duty by socalfmf - on 2/21/08 at 07:15 PM

Re: Re: Re: Re: Re: Re: M&R Sidewinder vs Anatol Heavy Duty by BlueZombie - on 2/22/08 at 11:37 AM

Returning from HELL! by RaySmith - on 2/16/08 at 07:31 AM

Re: Returning from HELL! by CALIBRATED - on 2/19/08 at 07:51 AM

Re: Re: Returning from HELL! by 244 - on 2/21/08 at 07:18 AM

Re: Re: Re: Returning from HELL! by CALIBRATED - on 2/21/08 at 08:52 AM

Lance, you've opened my eyes!!! by RaySmith - on 2/21/08 at 07:38 PM

Re: Lance, you've opened my eyes!!! by lavish909 - on 2/22/08 at 11:55 PM

Re: Re: Lance, you've opened my eyes!!! by RaySmith - on 2/23/08 at 12:52 PM

Re: Re: Re: Re: Returning from HELL! by 244 - on 2/21/08 at 11:19 AM

Re: Re: Re: Re: Re: Returning from HELL! by bimmridder - on 2/21/08 at 05:26 PM

Give It A Break (Please) by pwalsh - on 2/20/08 at 08:38 PM

Re: Give It A Break (Please) by socalfmf - on 2/21/08 at 06:59 AM
Re: Give It A Break (Please) by bimmridder - on 2/21/08 at 02:54 AM

Re: Re: Returning from HELL! by socalfmf - on 2/20/08 at 06:39 PM

Re: Re: Re: Returning from HELL! by RaySmith - on 2/21/08 at 05:35 AM

Re: Re: Re: Re: Returning from HELL! by CALIBRATED - on 2/21/08 at 07:03 AM

BIG THANKS to M&R by PLB - on 2/13/08 at 08:50 PM

Re: BIG THANKS to M&R by jayspins - on 2/14/08 at 02:46 PM

Re: Re: BIG THANKS to M&R by HTT-130 - on 2/17/08 at 08:32 PM
Re: Re: BIG THANKS to M&R by socalfmf - on 2/14/08 at 02:51 PM

Re: Re: Re: BIG THANKS to M&R by PLB - on 2/14/08 at 03:30 PM

Inktraps won't go in by Manuel - on 2/12/08 at 10:44 AM

Thank to Andy and Tim from M&R by Manuel - on 2/22/08 at 05:21 AM
Re: Inktraps won't go in by studog79 - on 2/15/08 at 08:30 AM

Re: Re: Inktraps won't go in (Correction) by studog79 - on 2/15/08 at 08:53 AM

Re: Inktraps won't go in by Andy - on 2/12/08 at 11:12 AM

jumbo printing by papag - on 2/10/08 at 07:59 AM

Re: jumbo printing by cyrus - on 2/10/08 at 07:39 PM

Re: Re: jumbo printing by papag - on 2/11/08 at 06:17 AM

Re: Re: Re: jumbo printing by J-MO - on 2/11/08 at 06:43 PM

Stroke adjustment by eid - on 2/5/08 at 11:09 AM

Re: Stroke adjustment by jepaul - on 2/7/08 at 10:11 AM
Re: Stroke adjustment by J-MO - on 2/5/08 at 07:47 PM

Dryer Down!! by studog79 - on 1/31/08 at 10:21 AM

A Conclusion by studog79 - on 2/7/08 at 05:34 PM

and that is why.... by socalfmf - on 2/9/08 at 08:57 AM
Re: A Conclusion (And GlenC) by CaptBret - on 2/7/08 at 09:26 PM

So what happend???? by socalfmf - on 2/2/08 at 07:38 AM
Re: Dryer Down!! UPDATE by studog79 - on 1/31/08 at 11:04 AM

Re: Re: Dryer Down!! UPDATE by bearwhiz - on 1/31/08 at 01:04 PM

Re: Re: Re: Dryer Down!! UPDATE by studog79 - on 1/31/08 at 01:26 PM

Re: Re: Re: Re: Dryer Down!! UPDATE by bearwhiz - on 2/2/08 at 09:38 AM
Re: Re: Re: Re: Dryer Down!! UPDATE by studog79 - on 2/1/08 at 08:04 AM

Re: Re: Re: Re: Re: Dryer Down!! UPDATE by studog79 - on 2/2/08 at 02:15 PM

Re: Re: Re: Re: Re: Re: Dryer Down!! UPDATE by CALIBRATED - on 2/3/08 at 11:18 AM

Working with the Dealer by studog79 - on 2/4/08 at 05:09 PM

Re: Working with the Dealer by CALIBRATED - on 2/5/08 at 04:52 PM
Re: Working with the Dealer by 244 - on 2/5/08 at 08:31 AM

Another Idea by studog79 - on 2/6/08 at 02:39 PM

Re: Another Idea by socalfmf - on 2/6/08 at 05:09 PM

Re: Re: Another Idea by studog79 - on 2/7/08 at 02:04 PM

Re: Re: Working with the Dealer by socalfmf - on 2/5/08 at 10:11 AM

Re: Re: Re: Re: Dryer Down!! UPDATE by bimmridder - on 2/1/08 at 02:53 AM
Re: Re: Re: Re: Dryer Down!! UPDATE by glenc - on 1/31/08 at 07:17 PM
Re: Re: Re: Re: Dryer Down!! UPDATE by 244 - on 1/31/08 at 04:52 PM

HELP: Red chili wont flash! by bryanhuber - on 1/26/08 at 03:25 PM

So what was it? nfp by socalfmf - on 1/27/08 at 06:26 PM

Re: So what was it? nfp by bryanhuber - on 1/27/08 at 07:10 PM

Re: Re: So what was it? nfp by socalfmf - on 1/27/08 at 07:53 PM

Re: HELP: Red chili wont flash! by 244 - on 1/27/08 at 08:58 AM
Re: HELP: Red chili wont flash! by glenc - on 1/27/08 at 08:16 AM

Re: Re: HELP: Red chili wont flash! by bryanhuber - on 1/27/08 at 07:18 PM

Re: Re: Re: HELP: Red chili wont flash! by glenc - on 1/28/08 at 07:07 AM

Re: Re: HELP: Red chili wont flash! by glenc - on 1/27/08 at 09:01 AM

Re: HELP: Red chili wont flash! by socalfmf - on 1/26/08 at 03:34 PM

Re: Re: HELP: Red chili wont flash! by bryanhuber - on 1/26/08 at 03:37 PM

Re: Re: Re: HELP: Red chili wont flash! by socalfmf - on 1/26/08 at 04:39 PM

Re: Re: Re: Re: HELP: Red chili wont flash! by bryanhuber - on 1/26/08 at 04:51 PM

Palomar Printing and.... by socalfmf - on 1/23/08 at 08:01 PM
NEED PALLETS by unique - on 1/22/08 at 11:08 AM

Re: NEED PALLETS by ASAPSCREENPRINT - on 1/23/08 at 05:52 AM

Re: Re: NEED PALLETS by ASAPSCREENPRINT - on 1/23/08 at 04:20 PM
totally agreed by socalfmf - on 1/23/08 at 03:31 PM

Re: NEED PALLETS by bearwhiz - on 1/22/08 at 02:14 PM
Re: NEED PALLETS by socalfmf - on 1/22/08 at 01:56 PM

Quartz Problems by apparelgraphics - on 1/18/08 at 01:53 PM

Re: Quartz Problems by cyrus - on 1/18/08 at 02:48 PM

Re: Re: Quartz Problems by apparelgraphics - on 1/18/08 at 03:25 PM

Re: Re: Re: Quartz Problems by cyrus - on 1/18/08 at 08:28 PM
Re: Re: Re: Quartz Problems by apparelgraphics - on 1/18/08 at 04:04 PM

M&R Credit Where Credit Is Due! by WRC555 - on 1/15/08 at 09:49 AM

Re: M&R Credit Where Credit Is Due! by ASAPSCREENPRINT - on 1/23/08 at 05:57 AM

Re: Re: M&R Credit Where Credit Is Due! by PLB - on 1/24/08 at 10:52 AM

Compressor / Chiller for Chameleon by dagger_graphics - on 1/15/08 at 09:16 AM

Re: Compressor / Chiller for Chameleon by 244 - on 1/15/08 at 04:51 PM

Re: Re: Compressor / Chiller for Chameleon by dagger_graphics - on 1/15/08 at 08:04 PM

Re: Re: Re: Compressor / Chiller for Chameleon by pressstan - on 1/16/08 at 07:52 AM

Tol o matic rebuild needed by WRC555 - on 1/15/08 at 08:00 AM

Re: Tol o matic rebuild needed by TBaldino - on 1/15/08 at 08:53 AM

Will Tri-Loc system work with Workhorse Point 1000 exposure unit? by Riverstone - on 1/11/08 at 06:48 AM

Re: Will Tri-Loc system work with Workhorse Point 1000 exposure unit? by Dragonfly - on 1/13/08 at 12:36 PM
Re: Will Tri-Loc system work with Workhorse Point 1000 exposure unit? by RonH - on 1/11/08 at 08:43 AM
Re: Will Tri-Loc system work with Workhorse Point 1000 exposure unit? by jepaul - on 1/11/08 at 07:34 AM

Loss of Even Ink Coverage on Automatic Press by simplypress - on 1/10/08 at 10:14 AM

Re: Loss of Even Ink Coverage on Automatic Press by bearwhiz - on 1/10/08 at 09:04 PM

What happened when you watched it print by bearwhiz - on 1/11/08 at 12:02 PM

Re: Loss of Even Ink Coverage on Automatic Press by chopper - on 1/10/08 at 03:10 PM

Re: Re: Loss of Even Ink Coverage on Automatic Press by simplypress - on 1/10/08 at 06:54 PM

Re: Loss of Even Ink Coverage on Automatic Press by Jvander - on 1/10/08 at 10:34 AM

Re: Re: Loss of Even Ink Coverage on Automatic Press by simplypress - on 1/10/08 at 11:08 AM

Re: Re: Re: Loss of Even Ink Coverage on Automatic Press by Bootha - on 1/14/08 at 10:31 AM
You sir have pneumatic heads... by jepaul - on 1/10/08 at 11:26 AM

Re: You sir have pneumatic heads... by simplypress - on 1/10/08 at 06:56 PM

Re: Re: You sir have pneumatic heads... by simplypress - on 1/10/08 at 06:56 PM

Re: Re: Re: You sir have pneumatic heads... by jepaul - on 1/10/08 at 07:22 PM

Now possible solutions... by jepaul - on 1/10/08 at 11:30 AM

Re: Now possible solutions... by vicb - on 1/10/08 at 11:41 AM

Thank you, M&R by bimmridder - on 1/10/08 at 09:01 AM
ink traps by Grigs - on 1/9/08 at 10:39 PM

Re: Reg System? by Logo01 - on 1/20/08 at 04:47 PM
Re: ink traps by Jvander - on 1/10/08 at 10:15 AM

Re: Re: ink traps by chopper - on 1/10/08 at 03:31 PM

Dont use them... by jepaul - on 1/10/08 at 08:02 AM

Besides Service what do you like about M&R by socalfmf - on 1/10/08 at 12:28 PM

Re: Besides Service what do you like about M&R by jepaul - on 1/10/08 at 02:21 PM

Re: Re: Besides Service what do you like about M&R by socalfmf - on 1/10/08 at 07:26 PM

Not to hot...good job by DanSanDiego - on 1/11/08 at 10:56 AM

God Dang M&R Service... by jepaul - on 1/9/08 at 03:57 PM
Random Rough Index by DanSanDiego - on 1/7/08 at 09:03 PM

Thank you all who replied by DanSanDiego - on 1/11/08 at 10:53 AM
Re: Random Rough Index by Trutech - on 1/8/08 at 02:36 PM

Re: Re: Random Rough Index by bimmridder - on 1/9/08 at 03:58 AM

Re: Re: Re: Random Rough Index by DanSanDiego - on 1/9/08 at 10:47 AM

Re: Random Rough Index by bearwhiz - on 1/7/08 at 10:56 PM

Re: Re: Random Rough Index by 244 - on 1/8/08 at 03:47 PM

Re: Re: Re: Random Rough Index by DanSanDiego - on 1/8/08 at 08:24 PM

MOUNTING BRACKET TO ALUMINUM PALLET by projay - on 1/5/08 at 04:19 PM

Re: MOUNTING BRACKET TO ALUMINUM PALLET by 244 - on 1/5/08 at 07:10 PM

Re: Re: MOUNTING BRACKET TO ALUMINUM PALLET by bearwhiz - on 1/6/08 at 04:38 PM
Re: Re: MOUNTING BRACKET TO ALUMINUM PALLET by projay - on 1/6/08 at 10:34 AM

PALLET TAPE ISSUES! by projay - on 1/2/08 at 09:40 PM

Re: PALLET TAPE ISSUES! by 244 - on 1/5/08 at 08:26 AM
Re: PALLET TAPE ISSUES! by bearwhiz - on 1/4/08 at 02:17 PM
Re: PALLET TAPE ISSUES! by Trutech - on 1/3/08 at 02:28 PM
Re: PALLET TAPE ISSUES! by bimmridder - on 1/3/08 at 03:50 AM

Road Show? by SkyLinePrints - on 1/2/08 at 05:55 AM

Re: Road Show? by bimmridder - on 1/3/08 at 03:49 AM
Re: Road Show? by 244 - on 1/2/08 at 08:26 AM

Re: Re: Road Show? by SkyLinePrints - on 1/2/08 at 10:29 AM

Fitting an automatic into a basement shop??? by cnasherman - on 12/23/07 at 06:52 PM

Re: Fitting an automatic into a basement shop??? by TBaldino - on 12/24/07 at 06:42 AM

Re: Re: Fitting an automatic into a basement shop??? by bearwhiz - on 12/26/07 at 12:02 PM

Re: Re: Re: Fitting an automatic into a basement shop??? by cnasherman - on 12/26/07 at 09:42 PM

Re: Re: Re: Re: Fitting an automatic into a basement shop??? by bearwhiz - on 12/28/07 at 10:28 PM

Re: Re: Re: Re: Re: Fitting an automatic into a basement shop??? by Saxtoon - on 12/29/07 at 08:17 PM

Re: Re: Re: Re: Fitting an automatic into a basement shop??? by fltrsei - on 12/27/07 at 08:48 AM

Re: Re: Re: Fitting an automatic into a basement shop??? by socalfmf - on 12/26/07 at 12:21 PM

Re: Fitting an automatic into a basement shop??? by socalfmf - on 12/23/07 at 07:52 PM

Tri-Loc by splash07 - on 12/21/07 at 04:08 PM

Re: Tri-Loc by TBaldino - on 12/22/07 at 10:03 AM
Re: Tri-Loc by J-MO - on 12/22/07 at 08:01 AM

Re: Re: Tri-Loc by splash07 - on 12/22/07 at 02:55 PM

What's new for Long Beach show? by NBCgraphics - on 12/19/07 at 11:24 AM

Re: What's new for Long Beach show? by TBaldino - on 12/20/07 at 06:27 AM
Re: What's new for Long Beach show? by socalfmf - on 12/19/07 at 01:09 PM

Re: Re: What's new for Long Beach show? by bimmridder - on 12/20/07 at 04:23 AM

NEED PALLETS FOR YOUTH AND SLEEVES by projay - on 12/18/07 at 08:41 PM

Re: NEED PALLETS FOR YOUTH AND SLEEVES by socalfmf - on 12/19/07 at 09:02 AM

Precision Dryer by grtpain - on 12/14/07 at 01:50 AM

Re: Precision Dryer by 244 - on 12/16/07 at 11:25 AM

Tri-loc for older M&R press? by EP - on 12/12/07 at 08:25 AM

Re: Tri-loc for older M&R press? by bearwhiz - on 12/16/07 at 06:51 PM
Re: Tri-loc for older M&R press? by TBaldino - on 12/13/07 at 10:01 AM

Re: Re: Tri-loc for older M&R press? by fltrsei - on 12/14/07 at 10:00 AM

Re: Re: Re: Tri-loc for older M&R press? by 244 - on 12/15/07 at 11:55 AM

Re: Re: Re: Re: Tri-loc for older M&R press? by Dragonfly - on 12/19/07 at 03:25 PM

Re: Re: Re: Re: Re: Tri-loc for older M&R press? by hawk1992 - on 12/20/07 at 02:13 AM

CFM's? by Logo01 - on 12/12/07 at 05:48 AM

Re: CFM's? by socalfmf - on 12/12/07 at 05:53 AM

Diamondback Frame size by splash07 - on 12/10/07 at 10:25 AM

Re: Diamondback Frame size by bearwhiz - on 12/10/07 at 12:09 PM

Re: Re: Diamondback Frame size by splash07 - on 12/10/07 at 03:54 PM

Adding 4th Panel to Radicure by dagger_graphics - on 12/3/07 at 03:00 PM

Re: Adding 4th Panel to Radicure by 244 - on 12/4/07 at 01:05 PM
Re: Adding 4th Panel to Radicure by TBaldino - on 12/4/07 at 06:11 AM

MSP 3140 by splash07 - on 11/29/07 at 07:06 PM

Re: MSP 3140 by RonH - on 11/30/07 at 06:08 AM

Re: Re: MSP 3140 by n8ivkjun - on 12/1/07 at 08:22 AM

Tacana Vs. Red Chili by Zelko-4-EVA - on 11/29/07 at 12:07 PM
Holy Crap!!!!!!!! by txscreener - on 11/29/07 at 09:42 AM

Re: Holy Crap!!!!!!!! by splash07 - on 11/29/07 at 07:08 PM

Re: Re: Holy Crap!!!!!!!! by socalfmf - on 11/29/07 at 07:30 PM

Re: Re: Re: Holy Crap!!!!!!!! by splash07 - on 11/30/07 at 11:01 AM

M&R Diamondback or Sportsman by jayspins - on 11/24/07 at 01:41 PM

Re: M&R Diamondback or Sportsman by Txscreenman - on 12/3/07 at 07:17 AM
Re: M&R Diamondback or Sportsman by socalfmf - on 11/24/07 at 02:01 PM

Re: Re: M&R Diamondback or Sportsman by splash07 - on 12/6/07 at 07:08 AM

Re: Re: Re: M&R Diamondback or Sportsman by Grigs - on 12/7/07 at 07:34 AM

Re: Re: Re: Re: M&R Diamondback or Sportsman by 244 - on 12/9/07 at 12:00 PM

Re: Re: Re: Re: Re: M&R Diamondback or Sportsman by FreshMode - on 2/7/08 at 10:47 AM

M&R Diamondback or by jayspins - on 11/24/07 at 01:39 PM
Maxi Cure dryer, need a little help by catnhat - on 11/21/07 at 10:26 AM

Thanks Guys. Got word this week, building going 3 phase! np by catnhat - on 12/1/07 at 09:07 AM
Re: Maxi Cure dryer, need a little help by splash07 - on 11/23/07 at 01:41 PM
Re: Maxi Cure dryer, need a little help by 244 - on 11/21/07 at 12:38 PM

Re: Re: Maxi Cure dryer, need a little help by splash07 - on 11/26/07 at 09:56 AM

Adding Colors to Chameleon by dagger_graphics - on 11/20/07 at 01:44 PM

Re: Adding Colors to Chameleon by 244 - on 11/21/07 at 01:08 PM

diamondback by splash07 - on 11/20/07 at 11:05 AM

Re: diamondback by terryei - on 11/20/07 at 11:59 AM

diamondback by splash07 - on 11/20/07 at 11:05 AM
Challanger revolver load dwell time by AlphaOne - on 11/13/07 at 11:44 AM

Re: Challanger revolver load dwell time by TBaldino - on 11/14/07 at 06:03 AM

thanks by pressstan - on 11/8/07 at 08:22 AM
Does anyone use a Kool Mist system? by apparelgraphics - on 11/7/07 at 04:21 PM

Re: Does anyone use a Kool Mist system? by MikeG - on 11/21/07 at 03:01 PM
Re: Does anyone use a Kool Mist system? by bearwhiz - on 11/7/07 at 08:27 PM

Question for 244 by kirby - on 11/4/07 at 08:04 PM

Re: Question for 244 by 244 - on 11/5/07 at 01:31 PM

Tri Lock light box by jerryicf - on 11/3/07 at 06:21 AM

Re: Tri Lock light box by kirby - on 11/3/07 at 07:32 PM

Congrats, Rich by bimmridder - on 11/1/07 at 04:54 AM

Way to go M&R.... by socalfmf - on 11/1/07 at 06:04 PM
Re: Congrats, Rich by 244 - on 11/1/07 at 06:26 AM

8/10 sportsman whats your thoughts on it? by bionicgraphix - on 10/29/07 at 09:35 PM

Re: 8/10 sportsman whats your thoughts on it? by socalfmf - on 10/30/07 at 04:46 AM

Re: Re: 8/10 sportsman whats your thoughts on it? by bionicgraphix - on 10/30/07 at 10:50 AM

Pallet issue by projay - on 10/29/07 at 07:42 PM

Re: Pallet issue by 244 - on 10/30/07 at 07:36 AM

Re: Re: Pallet issue by projay - on 10/30/07 at 09:47 PM

Re: Re: Re: Pallet issue by 244 - on 10/31/07 at 06:46 AM

ScreenPrinters.Net > Boards > M&R Printing Equipment

Only registered members may post to the Boards.

Need to register? It's free!

Having trouble posting after logging in? Click Here